Categories

Additional Information

Site Information

 Loading... Please wait...
Welcome to Our Store
 
  • Walkera QR X400 UFO 6 CH Devo F7 and DV04 Camera RC Quadcopter 2.4 GHz
  • Walkera QR X400 UFO 6 CH Devo F7 and DV04 Camera RC Quadcopter 2.4 GHz
  • Walkera QR X400 UFO 6 CH Devo F7 and DV04 Camera RC Quadcopter 2.4 GHz

Walkera QR X400 UFO 6 CH Devo F7 and DV04 Camera RC Quadcopter 2.4 GHz

$699.99 $399.99
(You save $300.00)
SKU:
W-QR-X400-DF7
Availability:
Out of Stock
Quantity:

Product Description

 

Download Walkera QRX400 PDF User Manual


Description:


QR X400 adopts the latest generation II 6-
axis stability control system simplifying stable flight and perfect
control, and has high load capacity, so you can install not only the
camera set for Aerial photography, but also the Temetry module, GPS and
RPM to monitor the real time battery voltage, temperature, motor speed
rate and aircraft location and height. This QR X400 adopted the latest generation
II 6 axis System, you can set up the camera set, Telemetry module GPS
and RPM. 2 propellers makes the QR X400 more simple and good apperance.

Features:


Adopting 4 brushless motors, the flight is more stable, and it can
make sorts of flight maneuver and also can make 3D rolls and flips.
The simple and compact modularized design features easy installation and maintenance
Adopting 6-Axis gyro control system ,which ensures precise flight performance.
You can install the camera set for Aerial photograghy. (Camera set needs to be purchased separately).
You can install the Telemetry module ,GPS and RPM to monitor the real
time battery voltage, temperature, motor speed rate and aircraft
location and height.
Extra-large capacity battery delivers an extra-long flight time!
Walkera recommends using a11.1V 2200mAh LiPo 25C LiPo battery for a
perfect flight.

Specification:

Main Rotor Diameter: 10 inches
Overall Length: 10.6 inches
Overall width: 10.6 inches
Weight: 786g (Battery included)
Battery: 11.1V 2200mAh Li-Po
Gyro: 6-Axis control system
ESC: WK-WST-30A4
Receiver: RX 2642-D
Brushless motor: WK-WS-28-009A
Transmitter: DEVO F7

F7 Specification:

Encoder: 7-channel micro computer system
Frequency: 2.4GHz DSSS
Output power:<=100mW
Current drain: <=500mA(100mWh)
Transmitter power supply: 7.4V800mAh
Output pulse: 1000—2000Ms(1500 Neutral)
Image receiving:5.8G
Channel selection: 8 channel

DV04 Camera Instruction:

DV04 Camera has the following two ways to cantrol the video:
*Press
the red switch once on the rear of the DV04 Camera, it means the DV04
Camera starts to video. Press the red switch again to stop the video.
*Pull
the Gear Switch to postion "1" and keep about 1-2seconds, then pull
back to postion "0". After finish the process, the DV04 Camera starts to
video. Pull Gear Switch again to stop video.
Notice: The Memory card must be inserted before the DV04 connects the battery, and remove the Memory card after power off.


What's Included:


1x Walkera QR X400 Quadrocopter

1x WK-WS-28-009A Motor

1x RX2642-D Receiver

1x English User manual

1x Tool Kit

1x Main blade




Walkera QR X400 UFO 6 CH Devo 7 RC Quadcopter 2.4GHz

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category