SKYRC Ultimate Duo 400W X2
Optimized operating software Internal independent lithium battery balancer Balancing individual cells battery discharging Adaptable to various type of lithium battery Fast and storage mode of lithium battery Maximum safety Automatic charging current limit Capacity limit Temperature threshold Processing time limit Data store/load Cyclic charging/discharging Specification: DC Input: 12-18Volt Charger circuit power: 800W (400Wx2) Charger current range: 0.1-20A Current drain for balancing port:v300mA/cell NiCD/NiMH battery cell count: 1-15 cells LiPo/LiFe/Lion cell count: 1-6 cells Pb battery voltage: 1-20V Net weight 1211g Dimension 200x140x55mm What's Included: 1x SKYRC Ultimate Duo 400W X2 1x Red Black Charging Cable (Crocodile clip) 1x Red Black Charging Cable (Open ended) 1x HP/PQ Adaptor 1 Pair of Crocodile Clamps 1x Manual Adaptable to various type of lithium battery Ultimate 400W×2 is adaptable to various types of lithium batteries, such as Li-Ion, LiPo and the new LiFe series of batteries. Fast and storage mode of lithium battery Purposes to charge Lithium battery varies, fast charge reduce the duration of charging, whereas store state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery. Maximum safety Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically. Automatic charging current limit You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode. Capacity limit The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value. Temperature threshold The batteries internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. This function is available by connecting temperature probe, which is included in the package. Processing time limit: You can also limit the maximum process time to avoid any possible defect. Data store/load For user’s convenience, it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting. Cyclic charging/discharging 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the batteries activity.
Write Your Own Review